Audio/Visual

Save $100 on this 2 piece set! Purchased separately, these pieces would cost $1198. The set includes our stainless steel desk and pedestal file cabinet. Our desk is made from 1½" stainless steel and finished with a 1/2" thick piece of glass. Minimal sleek lines combined with the modern look of stainless steel creates an office that will inspire you to do your best work. Slight differences in the swirls, or etching, of the stainless steel will be normal due to the hand finish applied to every product.

Thin is in, and our Plasma Stands are built to hold todays' generation of increasingly thinner plasma displays.This Plasma Stand and A/V caddy combo are built by hand from 1½" steel tube and are finished with 3/8" thick floating glass shelves. The stand can easily hold 80lbs and accommodate up to a 50" display. The A/V caddy can be set under or beside the stand to best suit your home theater setup and will hold 2-4 components. Each shelf on the Caddy will hold up to 150lbs. Add casters to the caddy for ease of mobility.

Save $250 on this three piece set! Purchased separately, these pieces would cost $1817. The set includes our stainless steel desk, side table, and equipment stand. All three pieces are made from 1½" stainless steel and finished with a 1/2" thick piece of glass. Minimal sleek lines combined with the modern look of stainless steel creates an office that will inspire you to do your best work. Slight differences in the swirls, or etching, of the stainless steel will be normal due to the hand finish applied to every product. Does not include the pedestal file cabinet.

This 3 piece Plasma/LCD Stand grouping consists of our 3 glass plasma stand, and two A/V caddies. Each piece is individually crafted in the USA. 3/8" thick glass shelves are inset flush with the steel, and float on 1" square blocks of solid steel. The 3 glass stand can accommodate up to a 70" plasma or LCD display and will support up to 500lbs spread evenly across the entire top. The A/V caddies include 2 floating glass shelves which can hold up to 150lbs each and have plenty of room for two components on each shelf. Add casters to the caddies for ease of mobility.

Warning: Expansion kits will not support your collection without being attached to a compatible rack.

Save $350 on this four piece set! Purchased separately, these pieces would cost $2216. The set includes our stainless steel desk, side table, equipment stand, and our raw steel pedestal file cabinet from HON. All three office pieces are made from 1½" stainless steel and finished with beautiful pieces of glass (3/8" or 1/2" thick). Minimal sleek lines combined with the modern look of stainless steel creates an office that will inspire you to do your best work. Slight differences in the swirls, or etching, of the stainless steel will be normal due to the hand finish applied to every product.

Purchased individually, this set would cost $2,407! This 3 piece set includes two 5 Tier Towers, one TV Table, and glass for all shelves. Built from welded 1½" steel with 3/8" glass shelves. The TV Table has dual midframe steel rails on the top to support up to 300lbs. The second shelf has plenty of room for components and center channel speaker. Each A/V tower has 5 tiers and cord management system. 1st, 3rd, and 4th shelf will hold up to 80lbs. 2nd and bottom shelves will hold up to 180lbs because of the added midframe supports.

This cool little wall hanging rack holds 110 CDs. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps CDs in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 10 - 15 minutes to put together.

Take the CD-110 and multiply it by 2 and you get double the capacity and double the cool. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps CDs in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 20 - 30 minutes to put together.

Add an expansion kit to double the capacity of a MM-160 to 320 DVD's, 440 CDs, 168 VHS or combo. Triples the capacity of the MM-72 to 232 DVDs, 500 CDs, 108 VHS or combo. Can also be attached to a MM-126 or MM-252. Approx. assembly time is 20 minutes. Warning: Expansion kits will not support your collection without being attached to a compatible multimedia rack.

This cool wall hanging rack holds 76 DVDs / 110 CDs / 36 VHS. The 100% steel construction, with an incredibly durable powder coat finish makes it as strong as it is unique. Steel slider divider on each tier keeps stored media in place. This wall mount rack includes 2 wall hangers with nails that drive in at an angle, which use the weight of the rack to hold them tight. Anchors may be hidden from view by installing on second rod from top. Note: the hangers are meant for sheetrock or wood walls, other wall substances may require additional hardware that is not provided. Ships unassembled and takes 10 - 15 minutes to put together.

Minimal sleek lines combine with the strength of steel to create an office that will inspire you to do your best work. The Studio Collection Desk is 24" x 48" and come with a 5/8" thick glass top that sets on top and goes edge to edge. Every desk comes on wheels, which include 2 locking and 2 non-locking casters per set. The overall height of the desk including the casters is 30". Each piece of our office furniture is made and finished by hand in our facilities, which ensures that each piece carries the Boltz high standards of quality and craftsmanship. Note: Shown here in Brushed Steel Finish for illustration purposes.